Spanco 200 Series
Mast Style Jib Crane
Spanco’s Mast-Style Jib cranes offer a lower cost alternative to freestanding jib cranes. Mast-Style cranes are bolted to the floor and an existing overhead support and require no special foundation, only a 6-inch reinforced concrete floor. The Mast-Style cranes are available with power rotation on both models.
Spanco Mast Style
Jib Crane, Full Cantilever | 200 Series
The Spanco 200 Series Mast Style Jib Crane is a full cantilever crane allowing for more headroom. These cranes feature a full 360° rotation that can be powered or unpowered. The 200 Series crane also features a span of up to 20’ with a standard crane.
- Boom mounted at the top of the mast to maximize clearance
- Up to a 5 ton capacity on standard models, and 10 tonnes custom
- Spans up to 20’ standard; 40’ custom
- Height up to 20’ standard; up to 40’ custom
Spanco Mast Style
Jib Crane, Drop Cantilever| 201 Series
The Spanco 201 Series Mast Style Jib Crane is a drop cantilever crane that uses side-plate connections to permanently “drop mount” the boom at any height on the mast. Drop cantilever booms allow for clearance from overhead obstructions that are located below the top of the mast. These cranes feature a full 360° rotation that can be powered or unpowered.
- Uses wide-flange beam or I-beam for the boom and a wide-flange beam for the column
- Capacities: up to 5 tons on standard models; up to 10 tons custom
- Both bearing assemblies are provided with grease fittings for lubrication to aid rotation
- Spans: up to 20’ standard; up to 40’ custom
Spanco 200 Series Specifications
| Model | Type | Boom Rotation | Capacity | Span | Height Under Boom | Powered Rotation |
|---|---|---|---|---|---|---|
| 200 Series |
Mast-Style Full Cantilever |
360° | Up to 5 tonnes standard; up to 10 tonnes custom | Up to 20 ft. standard; up to 10 tonnes custom | Up to 20 ft. standard; up to 40 ft. custom | Yes |
| 201 Series |
Mast-Style Drop Cantilever |
360° | Up to 5 tonnes standard; up to 10 tonnes custom | Up to 20 ft. standard; up to 40 ft. custom | Up to 20 ft. standard; up to 40 ft custom | Yes |
Regulations
Each of these systems meet the standards laid out in the AISC Steel Construction Manual, OSHA 1910.179, ANSI B30.11, AWS D1.1/D1.6 and CMAA 74.
Resources
Hoists
Liftsafe Engineering and Service Group carries top of the line hoists such as GH, Kito and Stahl.
Article
SWL/WLL/MRC – What do these abbreviations stand for and when should they be used?
Inspections
Periodic inspections based on crane use (see CSA B167-16), done by accredited inspectors is required by law.
GH Hoist Catalogue
lorem ipsum
Article
lorem ipsum
Case Study
lorem ipsum
Request a Quote
Customer Portal
Our customer portal reporting system is designed to give you 24-hour access to your reports, certificates and inspections.
Polytainers Overhead Bridge Crane Case Study
Our main concern was being able to safely and efficiently maneuver large molds and dies in and out of injection molding and thermoforming machines.
Crane Inspections and Maintenance
From design to implementation, we offer inspection, maintenance and repair services that span the entire life cycle of your lifting and material handling equipment.
We design, build, inspect and maintain.
GH Cranes & Hoists
Liftsafe is a leading supplier of GH products in Canada, offering premier industrial lifting equipment.
Customer Portal
Our customer portal reporting system is designed to give you 24-hour access to your reports, certificates and inspections.
About Liftsafe
We focus on creating turnkey solutions that allow your employees to do their jobs safely while protecting your company.